AI repair tools designed for ASE-certified technicians — per-VIN electrical diagnostics, I-CAR referenced repair guidance, and ADAS calibration support.
TemplateVault's AI tools are built around how professional technicians actually diagnose and document repairs. The AI Wiring Assistant works from the vehicle VIN — it pulls the per-VIN circuit table for your specific vehicle and walks a technician through a fault tree on the complaint at hand, whether that's a no-crank, parasitic draw, intermittent short, CAN bus dropout, or lamp-out. You can photograph the harness or connector directly in the bay; the OCR layer reads wire colors, connector labels, and pin numbers off the photo and reconciles them against the circuit table.
All AI outputs are clearly labeled AI-Assisted. Where I-CAR has published procedures, results include direct source links to rts.i-car.com so the technician can verify against the published source before proceeding. TemplateVault is a registered NASTF Service Information Provider member actively developing direct OEM data licensing.
The platform decodes the 17-character VIN via NHTSA to identify the exact make, model, trim, and year — then pulls the per-VIN circuit table.
Choose from no-crank, parasitic draw, CAN bus fault, lamp-out, intermittent short — or paste the customer complaint verbatim. The AI reads it either way.
Snap a photo of the connector, splice, or damaged wire. The OCR layer reads wire colors, connector labels, and pin numbers off the image and cross-references them with the per-VIN circuit table.
The AI proposes the next test, the expected reading at that test point, and what each result means. Each step is labeled AI-Assisted. Where I-CAR has published a matching procedure, a direct link to rts.i-car.com is included.
Per-VIN fault-tree diagnostics, circuit interpretation, and photo OCR for connector and harness identification. Covers no-crank, parasitic draw, CAN bus, lamp-out, and intermittent shorts.
AI-generated repair procedures with direct source links to I-CAR Repairability Technical Support. Outputs clearly labeled AI-Assisted vs Source-Referenced. OEM data pipeline in active development.
Static vs dynamic calibration requirements, trigger conditions, and equipment expectations — with I-CAR source links where published. Covers forward camera, radar, blind spot, lane keep, and 360 systems.
AI Wiring Assistant is included in Shop Pro at $99/month. Shop Starter starts at $49.99/month. 30-day refund.